To plan sales capacity for a field team, count the visits your accounts need in a year, then divide by the visits one rep can make in a year. The result is the number of reps you need. Add a revenue check, and allow for hiring time, ramp time and turnover. The worked example below, for a hypothetical distributor with 600 accounts, ends at six reps.
Most guides on this topic start with a quota and work back to headcount, which suits software sales. Field reps are limited by something else. A rep can only be in so many places in a year. So this article measures capacity in visits. It gives you the workload method first, the quota method as a second opinion, and then the things that change the answer.
Two ways to size a team, and why to use both
The workload method starts with the accounts. Each account needs a number of visits, and each rep has a number of visits in them. It answers the question, "Can this team cover this book?" The quota method starts with the revenue target. It divides the target by what a fully trained rep sells in a year. It answers, "Is this team big enough to sell the plan?"
Neither is complete alone. Workload tells you whether you can cover the accounts, but not whether the covered accounts will deliver the revenue. Quota says nothing about whether reps can physically reach the customers. When the two give similar numbers, you can trust the plan. When they don't, the gap is the most useful thing you learn.
Step 1: Count the visits your accounts need
Tier the accounts, give each tier a visit frequency, and multiply. If you have not set frequencies yet, call cycle planning walks through how. Then add the prospect visits you want, because a team that only maintains accounts will shrink.
| Group | Accounts | Cycle | Visits per account per year | Visits per year |
|---|---|---|---|---|
| A accounts | 60 | Every other week | 26 | 1,560 |
| B accounts | 140 | Every fourth week | 13 | 1,820 |
| C accounts | 400 | Every quarter | 4 | 1,600 |
| Prospects | 100 | Three visits each | 3 | 300 |
| Total | 700 | 5,280 |
This team's accounts need 5,280 visits a year. Those figures are made up for the example. Use your own counts, and take the account tiers from your invoice export and your reps' knowledge of potential.
Step 2: Work out how many visits one rep can make
Start with the calendar and take away what a rep cannot sell during. Then multiply the field days by the visits per day, and keep a margin for the unplanned.
| Step | Number | How it is reached |
|---|---|---|
| Weekdays in a year | 260 | 52 weeks x 5 days |
| Less holidays | -10 | Company holidays |
| Less vacation | -15 | Three weeks |
| Less sick days | -5 | A typical allowance |
| Less training and team meetings | -10 | Two weeks |
| Working days | 220 | |
| Field days | 198 | 90 percent of working days. The rest is office, planning and ride-alongs |
| Visits per field day | 6 | Includes the drive between stops |
| Visits in a year | 1,188 | 198 x 6 |
| Plan to 85 percent | 1,010 | Keeps room for a problem visit and a rescheduled one |
Six visits a day is a hypothetical average. A city rep with accounts a few blocks apart might make eight. A rep who drives 40 minutes between stops might make four. This number swings the answer more than any other, so measure it from your own data. Check-in times over a month tell you the real figure. The windshield time article shows what the drive costs.
Step 3: Check the answer against revenue
Now run the quota method. Divide next year's revenue target by what one fully trained rep carries. Take that figure from your last 12 months of invoices, by rep, for reps who were in the job the full year.
| Line | Number |
|---|---|
| Revenue last year | $6,900,000 |
| Reps who carried it | 5 |
| Revenue carried per rep | $1,380,000 |
| Target next year, 10 percent growth | $7,590,000 |
| Reps needed on the quota method | 5.5 |
The workload method says 5.2 and the quota method says 5.5. They land within half a rep, which is what you want. If workload said 4 and quota said 8, you would ask why. Maybe each visit has to carry far more revenue than it does now, or the account tiers are wrong, or the target assumes growth no one has a plan for. Settle that before you hire.
Step 4: Allow for hiring time, ramp time and turnover
A rep on the payroll is not a rep in the field at full speed. Three losses come out of the capacity you counted.
- Hiring time. From the day a rep leaves to the day a new one starts. Assume two months in this example.
- Ramp time. A new rep learns the products and the accounts. Assume three months at half productivity.
- Turnover. Assume 15 percent of reps leave in a year.
These are assumptions for the example. Replace them with your own history. For a team of five, 15 percent means 0.75 reps leave in a year. Each departure costs two months of vacancy plus 1.5 months of lost output during ramp, 3.5 months in total. So 0.75 x 3.5 = 2.6 rep-months, or 0.22 of a rep for the year. The team needs 5.2 + 0.22, about 5.5 reps of capacity. That means hiring six.
The same arithmetic applies to a planned hire. A rep who starts on January 1 and takes three months to reach half speed gives you 0.875 of a year of capacity in year one, not 1. Time the hiring so the ramp ends before the busy season.
Scenarios: what changes the answer
Capacity planning is mostly the questions you ask of the model. Change one input at a time, and watch the headcount.
| Scenario | Visits needed | Capacity per rep | Reps needed |
|---|---|---|---|
| Base case | 5,280 | 1,010 | 5.2 |
| Cut C accounts to one visit a year and three phone calls | 4,080 | 1,010 | 4.0 |
| Visit A accounts every week | 6,840 | 1,010 | 6.8 |
| Tighter routes, seven visits a day | 5,280 | 1,178 | 4.5 |
Move C accounts to the phone
C accounts take 1,600 visits, 30 percent of the load, for a small share of revenue. If you cut each one to a single visit and three calls, you save 1,200 visits and need about 4 reps. The calls still cost time. 1,200 calls at 10 minutes each is 200 hours, which someone has to make. A small inside role, or a rep's Friday afternoon, absorbs it. Look at the revenue those accounts give you before and after.
Add a rep, or visit the A accounts every week
A weekly cycle for 60 A accounts adds 1,560 visits and takes the team to 6.8 reps. Only do it if the extra visit changes the order. If the A accounts already order the same on a two-week cycle, the extra rep adds cost and not revenue. Compare the cost of the rep with the revenue you expect from the added attention. Do not assume a visit is worth the same for every account.
Tighten the territories
If better route design raises visits per day from six to seven, capacity per rep rises 17 percent and the same book needs 4.5 reps. This is why territory shape belongs in a capacity plan. Sales territory alignment covers how to redraw the lines so the accounts that need the most visits sit close together.
Pitfalls in sales capacity planning
- Dividing by 260 days. A rep does not work every weekday. Subtract holidays, vacation, sick days and training before you multiply.
- Using a visit count nobody measured. Visits per day is the number that moves the answer most. Use check-in data.
- Counting only existing accounts. Add the prospect visits you want or the team will only maintain the book.
- Planning to 100 percent. Customers cancel and problems come up. Plan to 85 percent.
- Ignoring the drive. Two territories with the same account counts can need different headcounts if one is spread over three counties.
- Hiring for the peak. If one season needs more visits, consider a temporary rep or a different cycle for that quarter.
- Trusting one method. Run the workload and the quota methods, and chase the difference.
Sales capacity worksheet
Copy this, fill it in with your numbers, and rerun it each time you change a tier or a cycle. Once a year is the minimum. Revisit it when you add a product line or lose a big customer.
Accounts: A ____ B ____ C ____ Prospects worked this year ____ Visits per account per year: A ____ B ____ C ____ Prospect ____ Visits needed = A x ____ + B x ____ + C x ____ + prospects x ____ = ______ Working days: 260 - holidays ____ - vacation ____ - sick ____ - training ____ = ____ Field days = working days x ____% = ____ Visits per field day (from check-ins): ____ Visits per rep per year = field days x visits per day = ____ Planned at ____% = ____ Reps needed (workload) = visits needed / planned visits per rep = ____ Revenue check: target $____ / revenue per full-year rep $____ = ____ reps Gap between the two methods: ____ reps. Reason: ______ Turnover ____% x reps ____ x months lost per departure ____ / 12 = ____ rep-years Headcount to plan for = reps needed + turnover loss, rounded up = ____ Scenario tested: ______ Reps needed: ____ Decision: ______
Keep the sheet next to your territory plan and review it whenever the tiers change. If your reps are already stretched, start with sales territory alignment, since moving accounts is faster and cheaper than hiring.
