Windshield time is the part of a field rep's day spent driving between customers instead of talking to them. Measure it as drive hours divided by total working hours. Cut it by clustering customers by area, giving each area a weekday, putting stops in driving order and repeating the route on a schedule.
The label sounds like a complaint, but it is a number you can manage. This article shows how to measure it for one rep in a week, works out what it costs with example numbers you can replace with your own, and gives four route planning methods, with a table that shows how much a better stop order can save.
What counts as windshield time
Windshield time is every minute a rep spends moving between stops: the drive from home to the first customer, each leg between customers, and the drive back. Parking and walking in from the lot are small enough to ignore. Two things look like windshield time and are not the same, and they are worth tracking separately. Google Maps caps a route at 9 stops, which matters on a busy day; see how many stops you can add on Google Maps.
- Waiting. Time at a customer's counter or in the lot before a buyer is free. It is lost like driving, but a different fix works.
- Admin. Notes, orders and emails between visits. Dictating a note at check-out moves this out of the evening.
Keep all three in view. If a rep's face time with customers is low, you need to know whether the cause is driving, waiting or paperwork before you change anything.
How to measure windshield time
You need one week of data from a few reps. Three methods work, from cheapest to most accurate.
- Ask the rep to log it. For one week, write down the time they leave home, the time they arrive and leave each customer, and the time they get home. Add the odometer at the start and end of each day. It takes two minutes a day.
- Use visit records. If reps check in and out at each customer, the gap between one check-out and the next check-in is travel plus waiting. The gap before the first check-in and after the last one adds the first and last drive.
- Compare with the map. For one day, enter the stops into a maps app in the order visited and read the drive time. If actual gaps are far longer, the difference is waiting, errands and detours.
Then work out two numbers for each day: windshield share (drive hours divided by working hours) and visits per day. Average them over the week.
What windshield time costs
Use your own figures. The ones below are examples chosen to be round, so you can follow the arithmetic and swap in yours.
| Line | Assumption | Working | Result |
|---|---|---|---|
| Paid time driving | 3.5 hours a day, 184 field days, $50 an hour all-in | 3.5 x 184 = 644 hours, x $50 | $32,200 |
| Vehicle cost | 30 mph average, 105 miles a day, $0.50 a mile all-in | 105 x 184 = 19,320 miles, x $0.50 | $9,660 |
| Total for one rep | $41,860 | ||
| Total for 20 reps | 20 x $41,860 | $837,200 |
Not all of that is waste. Customers are where they are, and some driving is the job. The question is what one hour a day of savings is worth. If a rep cuts the drive from 3.5 hours to 2.5, they save 184 hours and 5,520 miles a year: $9,200 of paid time and $2,760 of vehicle cost, $11,960 in all. Across 20 reps, that is $239,200.
The bigger gain is not the saving but what the hour buys. One saved hour is room for one more visit a day, which is 184 visits a year for one rep, or 3,680 across 20 reps. If a visit leads to an order often enough to matter, that is where the money is. Your own hit rate decides how much.
Route planning for sales reps: four methods
The methods work in sequence. Clustering decides which customers go together. Day zones decide when each cluster is visited. Ordering decides the stops within a day. Repeating makes the result stick.
1. Cluster customers by area
Put every customer on a map and group those that sit close together. A cluster is a set of customers a rep can visit in one day with little driving between them. Look for natural centers: an industrial park, a main street, a town along a highway. A cluster usually holds 5 to 8 customers.
Clusters only work if the territory itself is compact. If one rep's customers are scattered over three counties, no clustering can fix it. That is a territory problem, covered in the sales territory plan guide, and territory mapping shows the groupings on one map.
2. Give each area a day of the week
Assign one cluster to each weekday. Monday is the north side, Tuesday the east, and so on. Customers learn that the rep comes on Tuesday, and the rep stops crossing the territory twice in a week.
| Day | Zone | Customers | Notes |
|---|---|---|---|
| Monday | North industrial park | 7 | Early start, buyers in before 10 |
| Tuesday | East corridor | 6 | Two large accounts, allow longer visits |
| Wednesday | Downtown | 8 | Short drives, most visits in a day |
| Thursday | South and river towns | 5 | Longest drives, prospects here |
| Friday | Office, reports, rescheduled visits | 0 to 3 | Catch up on overdue accounts |
Fixed closing hours and delivery days still override the zones. A customer who only sees reps on Thursday morning gets a Thursday slot, even if the zone says Tuesday.
3. Put the stops in driving order
Within a day, the order of the stops matters more than most reps believe. Habit puts the biggest customer first, and the day zigzags. A better order follows the shape of the cluster. The table below shows five stops in the same area, driven in two orders.
| Leg | Habit order: miles | Driving order: miles |
|---|---|---|
| Home to first stop | 14 | 8 |
| First to second | 11 | 6 |
| Second to third | 16 | 7 |
| Third to fourth | 13 | 5 |
| Fourth to fifth | 9 | 6 |
| Last stop to home | 12 | 14 |
| Total | 75 | 46 |
At 30 miles an hour, 75 miles is 2.5 hours and 46 miles is about 1.5 hours. The same customers, with an hour back in the day. Four rules produce a good order by hand.
- Fix the appointments first. A buyer who is only in at 10 is a fixed point, and the rest of the day orders around it.
- Sweep, do not zigzag. Pick one direction around the cluster and work through it, so the route never crosses itself.
- Go out far and come back near. Start at the farthest stop and work home, or the reverse. Do not make two long drives.
- Check the road, not the map. A river, a rail line or a one-way street changes what is near.
4. Repeat the route on a schedule
Do the planning once and run it again. A repeating route comes back every week, every other week, every fourth week or every month, depending on the customer's tier. Planning does not start from a blank page each Monday, and no regular customer falls off because someone forgot.
Match the rhythm to the account. A large customer on a weekly route and a small one on a monthly route can share a zone and a day, and the small one only appears every fourth week. How to choose these rhythms is covered in call cycle planning.
Any scheduling tool can hold a repeating route. A shared calendar keeps the appointments, a spreadsheet keeps the call cycle for each account, and a route planner puts the stops in driving order and shows the drive. A calendar does not know the distance between stops, so check the drive time between them. Pick the tool the reps will open every morning, and keep one copy of the schedule.
How windshield time differs by industry
The same share of drive time means different things in different trades. These are typical patterns, not measurements, so check each against your own week with the log below.
| Industry | What the day looks like | Where the drive time goes | What helps most |
|---|---|---|---|
| Distribution and wholesale | Many short stops at business customers on a repeat schedule | The legs between stops, and a scattered customer list | Clusters, a weekday for each area and routes that repeat |
| Service and repair | Fewer stops, long time on site, and urgent calls that break the plan | Jobs far apart and emergency detours | Appointment windows with slack, and sending the nearest rep |
| Building materials | Early starts at job sites and yards, spread over a wide area | Long drives out to sites, and waiting for the contractor to come off the job | One trip a week per far area, and calling ahead before leaving |
| Medical supply | Clinics and hospitals with fixed access rules and visit windows | Waiting at the front desk and parking, more than driving | Booked appointments, and visits grouped by building or campus |
A service team measures time between jobs and a distributor measures time between stops, but the method is the same. Separate driving from waiting, and fix the larger one first.
A one-week windshield time check
Rep: ____________ Week of: ____________ Day: ______ Left home: ____ Home again: ____ Odometer start: ______ end: ______ Stop 1: ____________ arrived ____ left ____ Stop 2: ____________ arrived ____ left ____ Stop 3: ____________ arrived ____ left ____ Stop 4: ____________ arrived ____ left ____ Stop 5: ____________ arrived ____ left ____ Drive hours: ____ Visit hours: ____ Waiting and admin hours: ____ Windshield share (drive hours divided by working hours): ____% Visits made: ____ Customers skipped: ____ Reason: ____________
Do this for the rep with the lowest visit count, the rep with the highest, and one in the middle. The difference between them tells you whether the fix is route order, territory shape or something else.
Mistakes that keep windshield time high
- Planning every morning from a blank page. Reps who plan in the car lose the first half hour and pick the nearest or loudest customer.
- Going home midday. A lunch break at home adds a round trip. Plan lunch near a customer.
- Revisiting a cluster twice in a week. Visit each area on one day unless an account is a weekly one.
- Letting a single far customer set the day. One 40-minute drive for one stop costs more than it earns. Combine far customers into one trip a month.
- Measuring the wrong day. A holiday week or a trade show week gives bad data. Pick a normal week.
- Cutting driving by cutting visits. The goal is more selling time. If visits per day do not rise, you have just made a shorter day.
Your next step is the log above. Run it for one week with three reps, work out their windshield share and cost with your own rate per hour, and pick the one method that looks like the biggest gain. For reps who check in at each customer, the same figures come from visit records, and for more on tracking, see GPS tracking for sales reps.
